Memory Management Glossary: S¶

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

sbrk

sbrk is a Unix library function that adjusts the limit of the data segment; this limit is known as the break.

sbrk returns the previous value of the break, so sbrk(0) is a common idiom for getting the current value.

Note that, if you use brk, you probably can’t safely use sbrk as well, because it may store the last value of the break in a private variable.

scalar data type

A scalar data type is a type that is representable in a single dimension and whose objects have only magnitude as value.

Examples of scalar data types include: integers, floating-point numbers, enumerations, and characters.

Relevance to memory management

The objects of a scalar data type are leaf objects. Scalar data types with bounded magnitude can be represented compactly using value objects.

Historical note

Because compact representation solves many memory management issues, many older programming languages only offered bounded scalar data types. For example, the int type in C is defined to have a magnitude that can be represented by a word.

scan

The examination of an object or an area of memory (2) to find references, typically as part of tracing.

Scanning examines memory that has been decided to be non-garbage, to find references to objects that have been condemned.

In the MPS

See Scanning.

scan method

In the MPS

A function that examines a block of memory to find references and indicate them to the MPS. A scan method forms part of an object format. See mps_fmt_scan_t.

scan state

In the MPS

A scan state represents the state of the current scan. The MPS passes a scan state to the scan method of an object format when it needs to scan for references within a region of memory. Scan states belong to the type mps_ss_t.

scavenging garbage collection

See

copying garbage collection.

SDRAM

Synchronous Dynamic Random Access Memory. A high performance variant of DRAM.

SDRAM uses an external clock signal to synchronize its data input and output. It is capable of achieving very high data rates for linear access to memory.

segmentation violation

A segmentation violation occurs when an attempt is made to access memory (2) whose address is well-formed, but to which access cannot be granted. This might be due to either a protection fault or an invalid page fault.

The term is sometimes used more loosely as a synonym for any memory access error, including a bus error.

segmented addressing

In segmented addressing, addresses are in two parts: a segment identifier and an offset into that segment.

Each segment has a base address and a limit. If the offset is greater than the limit, the address is invalid (see segmentation violation). Otherwise, the offset is added to the segment’s base address, giving the unsegmented address. Segment identifiers may be implicit; for instance, they may be obtained from a current segment register.

Segmentation may be layered on top of virtual memory, in which case the unsegmented address is a virtual address, or not, in which case it is a physical address.

Note that, in segmented architectures, you can have a two-dimensional address space.

Segments are a feature of some processor architectures and operating systems. This description does not cover all possible variations on segmentation.

Historical note

Segment terminology may be used on unsegmented systems for historical reasons. For instance, Unix processes have text segments, even when running on an unsegmented system.

Opposite term

linear addressing.

segregated allocation cache

In the MPS

A mechanism for adding a segregated free list to a manual pool class. See Segregated allocation caches.

segregated fit

One of the segregated free list class of allocation mechanisms. There is an array of free lists, each holding free blocks of a particular range of sizes. The allocator identifies the appropriate free list and allocates from it (often using a sequential fit mechanism such as first fit). If this fails, a larger block is taken from another list and split.

The details of the mechanism depend on the division of sizes between free lists. See exact segregated fit and strict segregated fit.

This implements a good fit allocation policy.

Related publication

Wilson et al. (1995).

segregated free list

segregated free-list

A class of allocation mechanism which divides the free list into several subsets, according to the size of the free blocks. A freed or coalesced block is placed on the appropriate list. An allocation request is serviced from the appropriate list.

This class of mechanism implements a good fit or best fit policy.

Variations within this class include simple segregated storage, segregated fit, and buddy systems.

Related publication

Wilson et al. (1995).

In the MPS

Segregated allocation caches are a general mechanism for adding a segregated free list to any manually managed pool. See Segregated allocation caches.

semi-conservative garbage collection

Also known as

mostly-precise garbage collection, mostly-exact garbage collection.

A variant of conservative garbage collection which deals with exact references as well as ambiguous references.

For example, references from the root set might be ambiguous, but objects on the heap might be fully described and precisely scanned.

See also

mostly-copying garbage collection.

Related publication

Bartlett (1988).

semi-space

When an area of memory (2) is divided into two parts for the purposes of copying garbage collection, the parts are known as semi-spaces, or sometimes just spaces.

Each semi-space is a contiguous area of memory. Semi-spaces are usually used for two space collection, but can be used for generational collection.

The semi-space where objects reside at the start of the collection is known as the fromspace; the tospace is where objects will reside, and where new objects will be allocated, when the collection is complete.

See also

two-space collector.

semi-space collector

See

two-space collector.

sequential fit

A class of allocation mechanisms that maintain the free list as a single linear list of free blocks (a free block chain). Sequential fit mechanisms include first fit and next fit.

To quote Wilson et al. (1995):

The list is often doubly-linked and/or circularly linked. Typically, sequential fit algorithms use Knuth’s boundary tag technique, and a doubly-linked list to make coalescing simple and fast. […] In considering sequential fits, it is probably most important to keep strategy and policy issues in mind. The classic linear-list implementations may not scale well to large heaps, in terms of time costs; as the number of free blocks grows the time to search the list may become unacceptable. More efficient and scalable techniques are available, using totally or partially ordered trees, or segregated fits.

See also

bitmapped fit, indexed fit.

sequential store buffer

Also known as

SSB.

A sequential store buffer is a technique for dividing the cost of a write barrier by remembering which objects are modified and updating remembered sets (and so on) at a later stage.

This turns out to be extremely efficient on pipelined architectures with branch prediction.

shared memory

Memory locations are shared if they are in the range of multiple address spaces.

simple object

In the PostScript language, simple objects are the unboxed objects.

Unlike a composite object, a simple object contains all its data in the object itself.

Similar term

unboxed.

Opposite term

composite object.

simple segregated storage

A segregated free list allocation mechanism which divides memory (1) into pages or other areas and only allocates objects of a single size, or small range of sizes, within each area. This makes allocation fast and avoids headers, but may lead to high external fragmentation, as unused parts of areas cannot be reused for other object sizes.

Related publication

Wilson et al. (1995).

size

In the MPS

The term size in the documentation always refers to a size that is measured in bytes (1). The term count is used for the number of elements in an array.

size class

In the MPS

A segregated allocation cache maintains a reserve of free blocks in a set of sizes: each such size is known as a size class. When creating a segregated allocation cache by calling mps_sac_create(), the client program describes the desired set of size classes by passing an array of structures of type mps_sac_class_s. See Segregated allocation caches.

skip method

In the MPS

A format method that returns the address of the “next object” in a block of formatted objects. See mps_fmt_skip_t.

smart pointer

A smart pointer is an instance of a C++ class that encapsulates a pointer and performs reference counting.

By overloading certain operators it is possible for the class to present the illusion of being a pointer, so that operator\*, operator-\>, etc. can be used as normal. Reference counting allows the objects that are referred to using the smart pointer class to have their memory (1) automatically reclaimed when they are no longer referenced. It is a common technique used when trying to solve memory management problems in C++ applications.

However, reference counting is not always an appropriate memory management technique and smart pointers can be hard to implement properly in C++. A tracing garbage collector might be worth considering.

Related publication

Edelson (1992a).

snap-out

Also known as

transport snap-out.

In a copying collector, when there is a reference to an object that was condemned, but has been transported, snap-out is the adjustment of that reference to point to the preserved copy.

Typically the first transport leaves a forwarding pointer that enables the snap-out.

Snap-out.¶

See also

broken heart.

snapshot at the beginning

Snapshot-at-the-beginning algorithms for tracing, incremental GC note changes made by the mutator to the graph of objects and update the collector (2) state to make it trace relevant edges that the mutator deletes.

In order for the collector to miss a reachable object, the following two conditions need to hold at some point during tracing:

The mutator stores a reference to a white object into a black object.
All paths from any gray objects to that white object are destroyed.

Snapshot-at-the-beginning algorithms ensure the second condition cannot occur, by causing the collector to process any reference that the mutator overwrites and that might be part of such a path.

They are so called because they keep track of references that existed at the beginning of the collection cycle. Note that this does not mean all modifications need to be seen by the collector, only those needed to complete tracing without missing a reachable object (see Pirinen (1998) for details), nor does it mean that it won’t trace some references created during the collection.

Historical note

This distinction between incremental update and snapshot at the beginning was first introduced for write-barrier algorithms, but it applies to any type of tracing algorithm.

Opposite term

incremental update.

Related publications

Wilson (1994), Pirinen (1998).

soft reference

In Java terminology, soft reference is used to mean a reference encapsulated in a reference object of class SoftReference.

Soft references form one of three kinds of weak reference (1) in Java. They are handy for building caches (3) that are automatically flushed when memory is low.

See also

softly reachable.

SRAM

See

static memory (1).

SSB

See

sequential store buffer.

stack

A stack is a LIFO (last in, first out) collection: objects may be pushed onto the stack, and popped off it in reverse order of pushing.

When people say “the stack”, they usually mean the control stack supported by the OS and/or the processor.

Relevance to memory management

Stack allocation is an important technique. Control stacks are central to the performance of the system and often require special handling.

Historical note

The terms “stack”, “push”, and “pop” are taken from the spring-loaded dish stack found in cafeterias and salad bars where removing the top plate causes the others to rise up, exposing the next one, and adding a plate causes the spring to compress, leaving only that plate accessible.

So originally, the latest item was the “top”, “down the stack” meant towards earlier items, and “up” towards later ones, but today many use “up” and “down” in the opposite sense.

Similar term

control stack.

See also

data stack, cactus stack.

stack allocation

Stack allocation means run-time allocation and deallocation of memory (1) in last-in/first-out order.

Typically, stack allocation is performed on top of the main stack, but one can have a separate data stack for this purpose as well, as in Forth, or even multiple ones, as in the PostScript language.

Allocation and deallocation are typically fast, since they can be done simply by adding or subtracting the size of the block from the stack pointer.

Using only stack allocation, without heap allocation, is somewhat restrictive, as only objects whose size is known at compile-time can be returned from a procedure.

Some programming languages (such as some versions of Lisp and C) provide program-controlled stack allocation and deallocation of dynamic extent objects for efficiency, despite its being unsafe.

Similar term

automatic storage duration.

Opposite terms

heap allocation, static allocation.

See also

region inference, dynamic extent.

stack frame

Also known as

stack record.

A stack frame or record is an activation record that is stored on the stack.

In a register-based architecture, where the current activation record may be partially stored in registers, there may be hardware instructions that facilitate storing registers on the stack when another activation record is made current. Such instructions may prescribe a particular layout for activation records.

Relevance to memory management

Hardware support for saving and restoring registers, for stacks and for stack addressing may limit or otherwise prescribe the size and type of data that can be stored in a stack frame. Knowledge of the layout of each stack frame may assist a garbage collector in finding roots.

Similar term

activation record.

See also

stack.

stack record

See

stack frame.

static allocation

Static allocation means allocation of memory (1) before the program starts and retention until the end.

The locations of objects are basically decided at compile-time, although they might be relocated at load-time. This implies the sizes of the objects must be known then.

Using only static allocation is restrictive, as sizes of data structures can’t be dynamically varied, and procedures cannot be recursive. However, it is also fast and eliminates the possibility of running out of memory. For this reason, this scheme is sometimes used in real-time systems.

Similar term

static storage duration.

Opposite terms

stack allocation, heap allocation.

See also

region inference, static memory (2).

static memory⁽¹⁾

Also known as

static RAM, SRAM.

Static memory (2) or static RAM (SRAM) is a type of physical memory (2) that does not need to be refreshed periodically to avoid losing state.

Static memory is typically faster than dynamic memory, or requires essentially no power to preserve its state, but rarely both. These benefits result in static RAM being used for cache (1) memory, and also in portable, low-power applications (such as PDAs). It is, however, more expensive than dynamic RAM and requires more transistors, making dynamic RAM the choice for large amounts of memory (the main memory of desktop machines, for example).

Opposite term

dynamic memory.

static memory⁽²⁾

The memory (2) where statically allocated objects are stored is sometimes known as static memory. In the context of garbage collection, the term is used mean memory used to store static objects.

See also

static storage duration.

static object

A static object is non-moving. That is, it is not relocated by a memory manager; its address does not change.

static RAM

See

static memory (1).

static storage duration

In C and C++, the static keyword applied to a file scope variable or function means it is local to the file; the static keyword applied to a function or a block scope variable means it is allocated and initialized once only.

Objects declared locally in blocks with the static keyword are allocated in static memory (2), and initialized once (usually by the compiler/linker) instead of each time the block is entered.

Static variables within functions retain their value between function invocations, and therefore must form part of the root set of any collector (1).

Opposite term

automatic storage duration.

See also

lifetime.

stepper function

Also known as

visitor function.

In the MPS

A function that will be called on each element in a collection. For example, a stepper function of type mps_formatted_objects_stepper_t can be passed to mps_arena_formatted_objects_walk() and it will be called on all formatted objects in an arena.

sticky reference count

See

limited-field reference count.

stop-and-copy collection

Copying garbage collection that stops the mutator while the collector runs.

Stop-and-copy in a two-space collector.¶

Opposite terms

incremental garbage collection, parallel garbage collection.

storage

See

memory (1).

storage hierarchy

Also known as

memory hierarchy.

A typical computer has several different levels of storage. Each level of storage has a different speed, cost, and size. The levels form a storage hierarchy, in which the topmost levels (those nearest the processor) are fastest, most expensive and smallest.

Levels typically include processor registers, possibly some levels of cache (1), main memory, and possibly some levels of backing store.

Each level is commonly used as a cache (2) for the next level. For instance, virtual memory systems use main memory as a cache for backing store.

Storage hierarchy with (typical) relative cost, speed, and size.¶

storage level

One level in a storage hierarchy, for instance a cache (1), main memory, backing store, and so on.

See also

storage hierarchy.

storage management

See

memory management.

store⁽¹⁾

To transfer data from a processor’s registers to memory (2).

Store can also be used in the more general sense of transferring data from a part of the memory hierarchy that is fast to access to one that is slow to access.

STORE (or an abbreviation) is also commonly used in many processor architectures as the mnemonic for the machine code instructions that store data into memory.

Opposite term

load.

store⁽²⁾

See

memory (1).

strict segregated fit

A segregated fit allocation mechanism which has only one block size on each free list. A requested block size is rounded up to the next provided size, and the first block on that list is returned. The sizes must be chosen so that any block of a larger size can be split into a number of smaller sized blocks. Buddy systems are a special case of strict segregated fit allocators.

Related publication

Wilson et al. (1995).

strong reference

In a tracing garbage collector, a strong reference is a reference that keeps the object it refers to alive.

A strong reference is the usual sort of reference; The term is usually used to draw a contrast with weak reference (1).

Opposite term

weak reference (1).

See also

strong root.

strong root

A strong root is a root such that all references in it are strong references.

A strong root is the usual sort of root. The term is usually used to draw a contrast with weak root.

Opposite term

weak root.

In the MPS

Strong roots have rank mps_rank_ambig() or mps_rank_exact().

strong tri-color invariant

strong tri-colour invariant

strong tricolor invariant

strong tricolour invariant

The strong tri-color invariant is the property of a reference graph that there is no edge from a black node to a white node.

By preserving this property throughout tri-color marking, a tracing algorithm can ensure that the collector (2) will not miss reachable objects, even if the mutator manipulates the graph during the collection. This invariant can also be used to ensure that a copying garbage collector doesn’t confuse the mutator. Mutator actions might need to change the color of the nodes affected in order to preserve the invariant.

Algorithms using this invariant are incremental update algorithms.

Similar term

tri-color invariant.

See also

barrier (1), weak tri-color invariant.

Related publications

Johnstone (1997), Pirinen (1998).

strongly reachable

In Java, an object is strongly reachable, if there is a path from the roots to it that contains only strong references, that is, contains no reference objects.

See also

swapping, backing store.

swapped in

A process or page is swapped in if it is available in physical memory (1). This usually applies to the entire program image.

Similar term

paged in.

Opposite term

swapped out.

See also

swapping.

swapped out

A process or page is swapped out if it is not available in physical memory (1). This usually applies to the entire program image.

Similar term

paged out.

Opposite term

swapped in.

See also

swapping.

swapping

Historically, swapping was the technique of moving entire program images to disk (or drum) and back into physical memory (1), an early form of virtual memory. Nowadays, it is used as a synonym for paging.

Similar term

paging.

See also

swapped in, swapped out.

sweeping

Sweeping is the second phase (“the sweep phase”) of the mark-sweep algorithm. It performs a sequential (address-order) pass over memory to recycle unmarked blocks.

Sweeping typically gathers all unmarked blocks into one or more free lists.

See also

marking.

synchronous garbage collector

A collector (2) is asynchronous with respect to the mutator if it runs at predictable times, for example only when a collection function is called.

This means that mutator need not ensure that formatted objects are always scannable, as long as it makes them scannable before the collector runs.

Opposite term

asynchronous garbage collector.

Memory Management Glossary: S¶

Previous topic

Next topic

Downloads

Issues

Contact us