MPS TO CLIENT MESSAGE PROTOCOL
design.mps.message
incomplete doc
drj 1997-02-13
INTRODUCTION
.readership: Any MPS developer.
.intro: The MCMP provides a means by which clients can receive messages from
the MPS asynchronously. Typical messages may be low memory notification (or in
general low utility), finalization notification, soft-failure notification.
There is a general assumption that it should not be disastrous for the MPS
client to ignore messages, but that it is probably in the clients best interest
to not ignore messages. The justification for this is that the MPS cannot
force the MPS client to read and act on messages, so no message should be
critical [bogus, since we cannot force clients to check error codes either -
Pekka 1997-09-17].
.contents: This document describes the design of the external and internal
interfaces and concludes with a sketch of an example design of an internal
client. The example is that of implementing finalization using PoolMRG.
REQUIREMENTS
.req: The MPS/Client message protocol will be used for implementing
finalization (see design.mps.finalize and req.dylan.fun.final). It will also
be used for implementing the notification of various conditions (possibly
req.dylan.prot.consult is relevant here).
INTERFACE
External Interface
.if.queue:
Messages are presented as a single queue per arena. Various functions are
provided to inspect the queue and inspect messages in it (see below).
Functions
.if.fun:
The following functions are provided:
.if.fun.poll: Poll. Sees whether there are any messages pending.
mps_bool_t mps_message_poll(mps_arena_t arena);
Returns 1 only if there is a message on the queue of arena. Returns 0
otherwise.
.if.fun.enable: Enable. Enables the flow of messages of a certain type.
void mps_message_type_enable(mps_arena_t arena, mps_message_type_t type);
Enables the specified message type. The queue of messages of a arena will
contain only messages whose types have been enabled. Initially all message
types are disabled. Effectively this function allows the client to declare to
the MPS what message types the client understands. The MPS does not generate
any messages of a type that hasn't been enabled. This allows the MPS to add
new message types (in subsequent releases of a memory manager) without
confusing the client. The client will only be receiving the messages if they
have explicitly enabled them (and the client presumably only enables message
types when they have written the code to handle them).
.if.fun.disable: Disable. Disables the flow of messages of a certain type.
void mps_message_type_disable(mps_arena_t arena, mps_message_type_t type);
The antidote to mps_message_type_enable. Disables the specified message type.
Flushes any existing messages of that type on the queue, and stops any further
generation of messages of that type. This permits clients to dynamically
decline interest in a message type, which may help to avoid a memory leak or
bloated queue when the messages are only required temporarily.
.if.fun.get: begins a message "transaction".
mps_bool_t mps_message_get(mps_message_t *message_return, mps_arena_t arena,
mps_message_type_t type);
If there is a message of the specified type on the queue then the first such
message will be removed from the queue and a handle to it will be returned to
the client in *messageReturn; in this case the function will return TRUE.
Otherwise it will return FALSE. Having obtained a handle on a message in this
way, the client can use the type-specific accessors to find out about the
message. When the client is done with the message the client should call
mps_message_discard; failure to do so will result in a resource leak.
.if.fun.discard: ends a message "transaction".
void mps_message_discard(mps_arena_t arena, mps_message_t message);
Indicates to the MPS that the client is done with this message and its
resources may be reclaimed.
.if.fun.type.any: Determines the type of a message in the queue
mps_bool_t mps_message_queue_type(mps_message_type_t *type_return, mps_arena_t
arena);
Returns 1 only if there is a message on the queue of arena, and in this case
updates *type_return to be the type of a message in the queue. Otherwise
returns 0.
.if.fun.type: Determines the type of a message (that has already been got).
mps_message_type_t mps_message_type(mps_arena_t arena, mps_message_t message)
Return the type of the message. Only legal when inside a message transaction
(i.e. after mps_message_get and before mps_message_discard). Note that the
type will be the same as the type that the client passed in the call to
mps_message_get.
Types of messages
.type: The type governs the "shape" and meaning of the message.
.type.int: Types themselves will just be a scalar quantity, an integer.
.type.semantics: A type indicates the semantics of the message.
.type.semantics.interpret: The semantics of a message are interpreted by the
client by calling various accessor methods on the message. .type.accessor: The
type of a message governs which accessor methods are legal to apply to the
message.
.type.example: Some example types:
.type.finalization: There will be a finalization type. The type is abstractly:
FinalizationMessage(Ref).
.type.finalization.semantics: A finalization message indicates that an object
has been discovered to be finalizable (see design.mps.poolmrg.def.final.object
for a definition of finalizable). .type.finalization.ref: There is an accessor
to get the reference of the finalization message (i.e. a reference to the
object which is finalizable) called mps_message_finalization_ref.
.type.finalization.ref.scan: Note that the reference returned should be stored
in scanned memory.
.compatibility:
Compatibility issues
.compatibility.future.type-new: Notice that message of a type that the client
doesn't understand are not placed on the queue, therefore the MPS can introduce
new types of message and existing client will still function and will not leak
resources. This has been achieved by getting the client to declare the types
that the client understands (with mps_message_type_enable, .if.fun.enable).
.compatibility.future.type-extend: The information available in a message of a
given type can be extended by providing more accessor methods. Old clients
won't get any of this information but that's okay.
Internal Interface
.message.instance: Messages are instances of Message Classes.
.message.concrete: Concretely a Message is represented by a MessageStruct. A
MessageStruct has the usual signature field (see design.mps.sig). A
MessageStruct has a type field which defines its type, a ring node, which is
used to attach the message to the queue of pending messages, a class field,
which identifies a MessageClass object. .message.intent: The intention is that
a MessageStruct will be embedded in some richer object which contains
information relevant to that specific type of message.
.message.type:
typedef struct MessageStruct *Message;
.message.struct:
struct MessageStruct {
Sig sig;
MessageType type;
MessageClass class;
RingStruct node;
} MessageStruct;
.class: A message class is an encapsulation of methods. It encapsulates
methods that are applicable to all types of messages (generic) and methods that
are applicable to messages only of a certain type (type-specific).
.class.concrete: Concretely a message class is represented by a
MessageClassStruct (a struct). Clients of the Message module are expected to
allocate storage for and initialise the MessageClassStruct. It is expected
that such storage will be allocated and initialised statically.
.class.not-type: Note that message classes and message types are distinct.
.class.not-type.why: (see also mail.drj.1997-07-15.10-33(0) from which this is
derived) This allows two different implementations (ie classes) of messages
with the same meaning (ie type). This may be necessary because the (memory)
management of the messages may be different in the two implemtations (which is
bogus). The case of having one class implement two types is not expected to be
so useful. .class.not-type.why.not: It's all pretty feeble justification
anyway.
.class.methods.generic: The generic methods are:
delete - used when the message is destroyed (by the client calling
mps_message_discard). The class implementation should finish the message (by
calling MessageFinish) and storage for the message should be reclaimed (if
applicable).
.class.methods.specific:
The type specific methods are:
.class.methods.specific.finalization:
Specific to MessageTypeFinalization
finalizationRef - returns a reference to the finalizable object represented by
this message.
.class.methods.specific.collectionstats:
Specific to MessageTypeCollectionStats
collectionStatsLiveSize - returns the number of bytes (of objects) that were
condemned but survived.
collectionStatsCondemnedSize - returns the number of bytes condemned in the
collection.
collectionStatsNotCondemnedSize - returns the the number of bytes (of objects)
that are subject to a GC policy (ie collectable) but were not condemned in the
collection.
.class.type:
typedef struct MessageClassStruct *MessageClass;
.class.sig.double: The MessageClassStruct has a signature field at both ends.
This is so that if the MessageClassStruct changes size (by adding extra methods
for example) then any static initializers will generate errors from the
compiler (there will be a type error causes by initialising a non-sig type
field with a sig) unless the static initializers are changed as well.
.class.struct:
typedef struct MessageClassStruct {
Sig sig; /* design.mps.sig */
const char *name; /* Human readable Class name */
/* generic methods */
MessageDeleteMethod delete; /* terminates a message */
/* methods specific to MessageTypeFinalization */
MessageFinalizationRefMethod finalizationRef;
/* methods specific to MessageTypeCollectionStats */
MessageCollectionStatsLiveSizeMethod collectionStatsLiveSize;
MessageCollectionStatsCondemnedSizeMethod collectionStatsCondemnedSize;
MessageCollectionStatsNotCondemnedSizeMethod collectionStatsNotCondemnedSize;
Sig endSig; /* design.mps.message.class.sig.double */
} MessageClassStruct;
.space.queue: The arena structure is augmented with a structure for managing
for queue of pending messages. This is a ring in the ArenaStruct.
struct ArenaStruct
{
...
RingStruct messageRing;
...
}
Functions
.fun.init:
/* Initializes a message */
void MessageInit(Arena arena, Message message, MessageClass class);
Initializes the MessageStruct pointed to by message. The caller of this
function is expected to manage the store for the MessageStruct.
.fun.finish:
/* Finishes a message */
void MessageFinish(Message message);
Finishes the MessageStruct pointed to by message. The caller of this function
is expected to manage the store for the MessageStruct.
.fun.post:
/* Places a message on the client accessible queue */
void MessagePost(Arena arena, Message message);
This function places a message on the queue of a arena. .fun.post.precondition
: Prior to calling the function the node field of the message must be a
singleton. After the call to the function the message will be available for
MPS client to access. After the call to the function the message fields must
not be manipulated except from the message's class's method functions (i.e.,
you mustn't poke about with the node field in particular).
.fun.empty:
void MessageEmpty(Arena arena);
Empties the message queue. This function has the same effect as discarding all
the messages on the queue. After calling this function there will be no
messages on the queue. .fun.empty.internal-only: This functionality is not
exposed to clients. We might want to expose this functionality to our clients
in the future.
Message Life Cycle
.life: A message will be allocated by a client of the message module, it will
be initialised by calling MessageInit. The client will eventually post the
message on the external queue (in fact most clients will create a message and
then immediately post it). The message module may then apply any of the
methods to the message. The message module will eventually destroy the message
by applying the Delete method to it.
EXAMPLES
Finalization
[possibly out of date, see design.mps.finalize and design.mps.poolmrg instead
-- drj 1997-08-28]
This subsection is a sketch of how PoolMRG will use Messages for finalization
(see design.mps.poolmrg).
PoolMRG has guardians (see design.mps.poolmrg.guardian), guardians are used to
manage final references and detect when an object is finalizable.
The link part of a guardian will be expanded to include a MessageStruct; in
fact the link part of a guardian will be expanded so that it is exactly a
MessageStruct (or rather a structure with a single member that has the type
MessageStruct).
The MessageStruct is allocated when the final reference is created (which is
when the referred to object is registered for finalization). This avoids
allocating at the time when the message gets posted (which might be a tricky,
undesirable, or impossible, time to allocate).
The two queues of PoolMRG (the entry queue, and the exit queue) will use the
MessageStruct ring node. Before the object (referred to by the guardian) is
finalizable the MessageStruct is not needed by the Message system (there is no
message to send yet!), so it is okay to use the Message's ring node to attach
the guardian to the entry queue (see
design.mps.poolmrg.guardian.two-part.justify). The exit queue of MRG will
simply be the external message queue.
MRG Message class
del - frees both the link part and the reference part of the guardian.
| 2002-06-07 | RB | Converted from MMInfo database design document. |
This document is copyright © 1995-2002 Ravenbrook Limited. All rights reserved. This is an open source license. Contact Ravenbrook for commercial licensing options.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
This software is provided by the copyright holders and contributors "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement, are disclaimed. In no event shall the copyright holders and contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
$Id: //info.ravenbrook.com/project/mps/version/1.105/design/message/index.html#1 $
Ravenbrook / Projects / Memory Pool System / Master Product Sources / Design Documents