MPS Configuration ================= :Tag: design.mps.config :Author: Richard Brooksby :Date: 1997-02-19 :Status: incomplete design :Revision: $Id$ :Copyright: See section `C. Copyright and License`_. Introduction ------------ _`.intro`: This document describes how the `Memory Pool System `_ source code is configured so that it can target different architectures, operating systems, build environments, varieties, and products. Requirements ------------ _`.req.import`: The MPS must be simple to include in third-party projects. _`.req.arch`: Allow architecture specific configurations of the MPS, so that we can vary the MPS according to the target architecture. _`.req.os`: Allow operating system specific configurations of the MPS, so that we can vary the MPS according to the target OS. _`.req.builder`: Allow build environment specific configurations of the MPS, so that we can vary the MPS according to the compiler, etc. _`.req.var`: Allow configurations with different amounts of instrumentation (assertions, metering, etc.). _`.req.impact`: The configuration system should have a minimal effect on maintainability of the implementation. _`.req.port`: The system should be easy to port across platforms. _`.req.maint`: Maintenance of the configuration and build system should not consume much developer time. Retired requirements .................... _`.req.prod`: Allow product specific configurations of the MPS, so that we can build variants of the MPS for use in different products. This requirement has been retired on 2012-09-03 as part of work on the variety-reform_ branch. Client-specific customisation of the MPS will be handled in source control, while the MPS source remains generic, to reduce costs and increase reliability. See [RB_2012-09-13]_. Definitions ----------- _`.def.platform`: A *platform* is a combination of an architecture (.def.arch_), an operating system (.def.os_), and a builder (`.def.builder`_). The set of supported platforms is maintained in the `Platforms section of "Building the Memory Pool System" <../manual/html/guide/build.html#platforms>`_. _`.def.arch`: An *architecture* is processor type with associated calling conventions and other binary interface stuff these days often called the `ABI `_. Most importantly for the MPS it determines the layout of the register file, thread context, and thread stack. _`.def.os`: An *operating system* is the interface to external resources. Most importantly for the MPS it determines the low level interface to virtual memory (if any) and threading. _`.def.builder`: A *builder* is the tools (C compiler, etc.) used to make the target (.def.target). The MPS minimises use of compiler-specific extensions, but this is handy for suppressing warnings, inlining hints, etc. _`.def.var`: A *variety* determines things like the amount of debugging, internal consistency checking, annotation, etc. In modern IDEs this called a "build configuration" and the usual default is to have two: "debug" and "release". The MPS predates this convention, but the concept is the same. _`.def.prod`: A *product* is the intended product into which the MPS will fit, e.g. ScriptWorks, Dylan, etc. We no longer maintain this concept as a dimension of configuration since .req.prod_ has been retired. _`.def.target`: The *target* is the result of the build. Overview -------- _`.import.source`: The MPS can be simply included in client products as source code. Since `version 1.110`_ we made it possible to simply include the file ``mps.c`` in a client's build process, without requiring a separate build of the MPS or linking a library. This is described `section 2.3.1, "Compiling for production" of the MPS manual <../manual/html/guide/build.html#compiling-for-production>`_. .. _`version 1.110`: http://www.ravenbrook.com/project/mps/version/1.110/ _`.no-gen`: No generated code or external tools are required. On most platforms the only tool is the C compiler. On 64-bit Windows we require the assembler since Microsoft withdrew in-line assembler from their C compiler. _`.no-spaghetti`: Several of the MPS team have worked on some extremely messy code bases which used a great number of ``#ifdef`` statements. These quickly became very expensive to maintain and develop. The general rule in the MPS is "no ``#ifdefs``". Instead, platform-specific code is kept in separate source files and selected by carefully controlled ``#ifdefs``, such as in `mps.c <../code/mps.c>`_. _`.min-dep`: Dependency on a particular configuration should be minimized and localized when developing code. This is enshrined in the general rules for implementation [ref?] that are enforced by MPS development procedures including code review and inspection. The Build System ---------------- Abstract Build Function ....................... _`.build.fun`: The MPS implementation assumes only a simple "build function" that takes a set of sources, possibly in several languages, compiles them with a set of predefined preprocessor symbols, and links the result with a set of libraries to form the target:: target := build(, , ) _`.build.sep`: Separate compilation and linkage can be seen as a memoization of this function, and is not strictly necessary for the build. Indeed, since `version 1.110` we found that modern compilers are quite happy to compile the whole MPS in one go `.import.source`_. _`.build.cc`: A consequence of this approach is that it should always be possible to build a complete target with a single UNIX command line calling the compiler driver (usually "cc" or "gcc"), for example:: cc -o main -DCONFIG_VAR_DF foo.c bar.c baz.s -lz _`.build.defs`: The "defs" are the set of preprocessor macros which are to be predefined when compiling the module sources:: CONFIG_VAR_ The variety-codes are the letter code that appears after "variety." in the tag of the relevant variety document (see variety.*) converted to upper case. Currently (2012-09-03): _`.var.hot`: ``HOT`` Intended for release in products. Optimised, reduced internal checking, especially on the `critical path `_ [RB_2012-09-07]_. _`.var.cool`: ``COOL`` Intended for use during development. Moderately thorough internal consistency checking. Reduced optimisation to allow for single-stepping. _`.var.rash`: ``RASH`` No internal checking at all. Slight performance improvement over `.var.hot`_ at the cost of early detection of memory management bugs. We do not advise use of this variety, as memory management bugs tend to be extremely expensive to deal with. _`.var.diag`: ``DIAG`` (deprecated) This variety does some client-specific analysis and produces some specialised diagnostic output, and is not intended for general use. It will be phased out of the open sources. _`.default.hot`: If no ``CONFIG_VAR`` is present, ``HOT`` is assumed in `config.h`_. _`.build.srcs`: The "srcs" are the set of sources that must be compiled in order to build the target. The set of sources may vary depending on the configuration. For example, different sets of sources may be required to build different architectures. [This is a dependency between the makefile (or whatever) and the module configuration in `config.h`_.] _`.build.libs`: The "libs" are the set of libraries to which the compiled sources must be linked in order to build the target. For example, when building a test program, it might include the ANSI C library and an operating system interface library. File Structure .............. _`.file.dir`: The MPS source code is arranged in a single directory called "code" containing all the sources for the whole family of targets. _`.file.base`: The names of sources must be unique in the first eight characters in order to conform to FAT filesystem naming restrictions. (Do not scoff -- this has been an important requirement as recently as 2012!) _`.file.ext`: The extension may be up to three characters and directly indicates the source language. _`.file.platform`: Platform-specific files include the platform code in their name. See `.mod.impls`_. Modules and Naming .................. _`.mod.unique`: Each module has an identifier which is unique within the MPS. _`.mod.impls`: Each module has one or more implementations which may be in any language supported by the relevant build environment. _`.mod.primary`: The primary implementation of a module is written in target-independent ANSI C in a source file with the same name as the module. _`.mod.an`: Where there are platform-specific implementations and an inferior portable ANSI C fallback implementation, "an" is used in place of the platform code. _`.mod.secondary`: The names of other implementations should begin with the same prefix (the module id or a shortened version of it) and be suffixed with on or more target parameter codes (defined below). In particular, the names of assembly language sources must include the target parameter code for the relevant architecture. _`.mod.example`: For example, the stack scanner is defined in `ss.h <../code/ss.h>`_ (which is platform-independent). It has some platform-independent C in `ss.c <../code/ss.c>`_ and, for example, `ssw3i6mv.c <../code/ssw3i6mv.c>`_ is specific to Windows on the x64 architecture built with Microsoft Visual C. Build System Rationale ...................... _`.build.rat`: This simple design makes it possible to build the MPS using many different tools. Microsoft Visual C and other graphical development tools do not support much in the way of generated sources, staged building, or other such stuff. The Visual C and Xcode "project" files correspond closely to a closure of the build function (`.build.fun`_). The simplicity of the build function has also made it easy to set up builds using NMAKE (DOS), MPW (Macintosh), and to get the MPS up and running on other platforms such as FreeBSD and Linux in very little time. The cost of maintaining the build systems on these various platforms is also reduced to a minimum, allowing the MPS developers to concentrate on primary development. The source code is kept simple and straightforward. When looking at MPS sources you can tell exactly what is going to be generated with very little context. The sources are not munged beyond the standard ANSI C preprocessor. _`.build.port`: The portability requirement (`.req.port`_) implies that the build system must use only standard tools that will be available on all conceivable target platforms. Experience of development environments on the Macintosh (Metrowerks Codewarrior) and Windows NT (Visual C++) indicates that we cannot assume much sophistication in the use of file structure by development environments. The best that we can hope for is the ability to combine a fixed list of source files, libraries, and predefined preprocessor symbols into a single target. _`.build.maint`: The maintainability requirement (`.req.maint`_) implies that we don't spend time trying to develop a set of tools to support anything more complicated than the simple build function described above. The effort in constructing and maintaining a portable system of this kind is considerable. Such efforts failed in the Electronic Publishing division of Harlequin. Implementation -------------- _`.impl`: The two implementation files `config.h`_ and `mpstd.h`_ can be seen as preprocessor programs which "accept" build parameters and "emit" configuration parameters (`.fig.impl`_). The build parameters are defined either by the builder (in the case of target detection) or by the build function (in the case of selecting the variety). _`.fig.impl`:: build parameters configuration parameters CONFIG_VAR_DF --> config.h --> MPS_VAR_DF, ASSERT_MPM, etc. _WIN32 --> mpstd.h --> MPS_OS_W3, etc. _`.impl.dep`: No source code, other than the directives in `config.h`_ and `mpstd.h`_, should depend on any build parameters. That is, identifers beginning "CONFIG\_" should only appear in impl.h.config. Code may depend on configuration parameters in certain, limited ways, as defined below (`.conf`_). .. _`config.h`: <../code/config.h> .. _`mpstd.h`: <../code/mpstd.h> Target Platform Detection ......................... _`.pf`: The target platform is "detected" by the preprocessor directives in `mpstd.h`_. _`.pf.form`: This file consists of sets of directives of the form:: #elif #define MPS_PF_ #define MPS_OS_ #define MPS_ARCH_ #define MPS_BUILD_ #define MPS_T_WORD #define MPS_T_ULONGEST #define MPS_WORD_SHIFT #define MPS_PF_ALIGN _`.pf.detect`: The conjunction of builder predefinitions is a constant expression which detects the target platform. It is a logical AND of expressions which look for preprocessor symbols defined by the build environment to indicate the target. These must be accompanied by a reference to the build tool documentation from which the symbols came. For example:: /* "Predefined Macros" from "Visual Studio 2010" on MSDN * . */ #elif defined(_MSC_VER) && defined(_WIN32) && defined(_M_IX86) _`.pf.codes`: The declarations of the platform, operating system, architecture, and builder codes define preprocessor macros corresponding the the target detected (`.pf.detect`_). For example:: #define MPS_PF_W3I3MV #define MPS_OS_W3 #define MPS_ARCH_I3 #define MPS_BUILD_MV _`.pf.word`: The declaration of ``MPS_T_WORD`` defines the unsigned integral type which corresponds, on the detected target, to the machine word. It is used to defined the MPS Word type (design.mps.type.word). [Insert backwards ref there.] (We avoid using ``typedef`` here because `mpstd.h`_ could potentially be included in assembly language source code.) For example:: #define MPS_T_WORD unsigned long _`.pf.word-width`: The declaration of ``MPS_WORD_WIDTH`` defines the number of bits in the type defined by `MPS_T_WORD` (`.pf.word`_) on the target. For example:: #define MPS_WORD_WIDTH 32 _`.pf.word-shift`: The declaration of ``MPS_WORD_SHIFT`` defines the log to the base 2 of ``MPS_WORD_WIDTH``. For example:: #define MPS_WORD_SHIFT 5 _`.pf.pf-align`: The declaration of ``MPS_PF_ALIGN`` defines the minimum alignment which must be used for a memory block to permit any normal processor memory access. In other words, it is the maximum alignment required by the processor for normal memory access. For example:: #define MPS_PF_ALIGN 4 _`.pf.ulongest`: The declaration of ``MPS_T_ULONGEST`` defines the longest available unsigned integer type on the platform. This is usually just ``unsigned long`` but under Microsoft C on 64-bit Windows ``unsigned long`` is just 32-bits (curse them!) For example:: #define MPS_T_ULONGEST unsigned __int64 _`.pf.pf-string`: The declaration of ``MPS_PF_STRING`` defines a string that is used to identify the target platform in `version.c <../code/version.c>`_. For example:: #define MPS_PF_STRING "w3i6mv" Target Varieties ................ _`.var`: The target variety is handled by preprocessor directives in impl.h.config. _`.var.form`: The file contains sets of directives of the form:: #elif defined(CONFIG_VAR_DF) #define MPS_VAR_DF #define ASSERT_MPSI #define ASSERT_MPM etc. _`.var.detect`: The configured variety is one of the variety preprocessor definitions passed to the build function (`.build.defs`_), e.g. ``CONFIG_VAR_HOT``. These are decoupled so that it's possible to tell the difference between overridden settings etc. [Explain.] _`.var.symbols`: The directives should define whatever symbols are necessary to control annotations. These symbols parameterize other parts of the code, such as the declaration of assertions, etc. The symbols should all begin with the prefix ``MPS_VAR\_``. [Tidy this up:] Note, anything which can be configured, is configured, even if it's just configured to "NONE" meaning nothing. This makes sure that you can't choose something by omission. Where these symbols are used there will be a #error to catch the unused case. Exception: To allow simple building of the MPS with "cc -c mps.c" we choose CONFIG_VAR_HOT by default. [This is a general principle which applies to other configuration stuff too.] Source Code Configuration ------------------------- _`.conf`: This section describes how the configuration may affect the source code of the MPS. _`.conf.limit`: The form of dependency allowed is carefully limited to ensure that code remains maintainable and portable (`.req.impact`_). _`.conf.min`: The dependency of code on configuration parameters should be kept to a minimum in order to keep the system maintainable (`.req.impact`_). Configuration Parameters ........................ _`.conf.params`: The compilation of a module is parameterized by:: MPS_ARCH_ MPS_OS_ MPS_BUILDER_ MPS_PF_ Abstract and Concrete Module Interfaces ....................................... _`.abs.caller`: Basic principle: the caller musn't be affected by configuration of a module. This reduces complexity and dependency of configuration. All callers use the same abstract interface. Caller code does not change. _`.abs.interface`: Abstract interface includes: - method definitions (logical function prototypes which may be macro methods) - names of types - names of constants - names of structures and fields which form part of the interface, and possibly their types, depending on the protocol defined - the protocols _`.abs.rule`: The abstract interface to a module may not be altered by a configuration parameter. However, the concrete interface may vary. For example, this isn't allowed, because there is a change in the interface:: #if defined(PROT_FOO) void ProtSpong(Foo foo, Bar bar); #else int ProtSpong(Bar bar, Foo foo); #endif This example shows how:: #ifdef PROTECTION void ProtSync(Space space); /* more decls. */ #else /* PROTECTION not */ #define ProtSync(space) NOOP /* more decls. */ #endif /* PROTECTION */ or:: #if defined(PROT_FOO) typedef struct ProtStruct { int foo; } ProtStruct; #define ProtSpong(prot) X((prot)->foo) #elif defined(PROT_BAR) typedef struct ProtStruct { float bar; } ProtStruct; #define ProtSpong(prot) Y((prot)->bar) #else #error "No PROT_* configured." #endif Configuration parameters may not be used to vary implementations in C files. For example, this sort of thing:: int map(void *base, size_t size) { #if defined(MPS_OS_W3) VirtualAlloc(foo, bar, base, size); #elif defined(MPS_OS_SU) mmap(base, size, frob); #else #error "No implementation of map." #endif } This violates `.no-spaghetti`_. To document ----------- - What about constants in config.h? - Update files to refer to this design document. - Explain the role of ``mps.c`` - Reference to ``build.txt`` - Procedures for adding an architecture, etc. - Reduce duplication in this document (especially after `Configuration Parameters`_ which looks like it's been pasted in from elsewhere.) A. References ------------- .. [MPS_Manual] "Memory Pool System documentation"; Ravenbrook Limited; . .. [RB_2012-09-07] "The critical path through the MPS"; `Richard Brooksby `_; Ravenbrook Limited; 2012-09-07; . .. [RB_2012-09-13] "The Configura CET custom mainline"; `Richard Brooksby `_; Ravenbrook Limited; 2013-09-13; . .. [PP_2005-03-01] "MPS platforms"; Pekka Pirinen; Global Graphics; . B. Document History ------------------- - 1997-02-19 RB_ Initial draft based on discussions of configuration at meeting.general.1997-02-05. - 1997-02-20? RB_ Various improvements and clarifications to the draft discussed between RB_ and NB_ at meeting.general.1997-02-19. - 2002-06-07 RB_ Converted from MMInfo database design document. - 2012-09-03 RB_ Updated for variety-reform_ branch, to remove untrue things, though the document could do with a rewrite. - 2013-05-11 RB_ Converted to reStructuredText. Clarified various sections, brought some up-to-date, and removed obsolete junk. .. _variety-reform: http://www.ravenbrook.com/project/mps/branch/2012-08-15/variety-reform/ .. _RB: http://www.ravenbrook.com/consultants/rb/ .. _NB: http://www.ravenbrook.com/consultants/nb/ C. Copyright and License ------------------------ Copyright (C) 2013 Ravenbrook Limited. All rights reserved. . This is an open source license. Contact Ravenbrook for commercial licensing options. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Redistributions in any form must be accompanied by information on how to obtain complete source code for this software and any accompanying software that uses this software. The source code must either be included in the distribution or be available for no more than the cost of distribution plus a nominal fee, and must be freely redistributable under reasonable conditions. For an executable file, complete source code means the source code for all modules it contains. It does not include source code for modules or files that typically accompany the major components of the operating system on which the executable file runs. **This software is provided by the copyright holders and contributors "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement, are disclaimed. In no event shall the copyright holders and contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.**